Measuring Effectiveness For Specific Marketing Tactics Across Campaigns, Customers (Part 3 of 4)

Published: August 25, 2009

You may be doing some lead tracking to understand conversion rates and customer profitability, which is great. But the sales team will inevitably let marketing know that 1) marketing was just a small step in closing the sale so they deserve the credit, 2) they would have found and closed those leads anyway so there is no incremental value, or 3) the leads are fine but there is just never enough. We need reliable measurements to both prove and improve our marketing effectiveness.

The first two parts of this article series published over the past few months have outlined what is necessary to improve lead quality (covered in Part 1) and how to improve sales alignment for better lead transition, tracking, and sales support that increases the close rates of those leads (covered in Part 2). We’ll now look at the measurements challenges for lead generation as we provide insight into the most common questions lead generation marketers raise with respect to measurements.

Lead Generation Measurements

Measurements around lead generation are made easier by the fact that once a contact is generated, their interactions and outcomes can be tracked (systems and operational issues aside). But there are also a number of challenges unique to lead generation, which require a closer look at what it takes to get reliable measurements.

Get the latest B2B Marketing News & Trends delivered directly to your inbox!

Let’s address the most common measurement questions, starting with the basic and moving to more advanced. As you look through these, keep in mind that there are four primary categories of marketing measurement that we can have to assess the incremental impact of marketing: pre-post tracking or trending, market testing, modeling, and surveys.

How do you match lead contacts to buyer contacts when different people from the same company are involved in the buying process? (lead tracking)

This match-back challenge can occur when the basic measurement technique is to track from the marketing tactic generating the lead to closed sale. In some companies the sales system does not contain enough detail to link the marketing contact, who may be a recommender or decision-maker, with the buyer, who may be from procurement or another person on the purchasing “committee.” You have a contact that is engaged with your marketing and passed into the sales organization as a lead but your only tracking option is to go to a purchase database and try to make a match.

If you choose to match by contact name, you will under-state your marketing impact since you know many of the buyers listed in the financial system do not represent the full set of decision-makers and recommenders you influenced. But if you match by just company name (as I have seen companies do), you will over-state your marketing impact, especially if you have a reasonable number of large clients with multiple buying groups.

A good compromise for those companies limited to some form of match-back is to match by company name and location. It is still subject to error but gets closer than either extreme. An alternative is to use periodic surveys of your marketing contacts to determine the sales close rate. The survey can also be used as a checkpoint or calibration of your match-back process.

Which marketing tactic gets credit for the lead? (multi-touch marketing assessment)

Prospects are typically touched by multiple marketing contacts prior to qualifying as a lead that is put into the sales cycle. In most lead measurements, the last marketing contact gets credited for generating the lead. When most of your marketing efforts are response-oriented, this approach can work fine. Every marketing contact is generating a level of interest and it took that last marketing contact to get a certain set of prospects to become leads. This tracking approach will under-value marketing initiatives that are better at generating interest and boosting the response for other marketing initiatives and it can also over-value marketing touchpoints that pick up leads that would have otherwise come in through other contacts.

The solution is not to allocate credit to multiple contacts but to set up measurements that isolate the incremental impact of specific marketing initiatives. This can be done through market tests when assessing specific tactics, or through modeling when assessing multiple tactics and their interaction effects. Modeling can establish correlations to identify which touchpoints are most influential in generating leads or closed sales.

Note: For a more detailed explanation of options and issues see our archived article “Measuring the Impact of Multi-Touch Marketing.”

What incremental impact has marketing generated? (structured measures)

The best measure to show the true incremental impact of marketing is market testing using test and control groups. I am generally not an advocate of complete “no-contact” control groups which require eliminating marketing contacts for the purpose of demonstrating the incremental value of marketing because we are typically not trying to prove that no marketing is a viable alternative. While there are some instances where these complete no-contact control groups make sense, more often we will set up control groups that have “business as usual” marketing and sales contacts with the exception of a select marketing initiative(s) that are withheld. Market testing is also very effective to build the case for adding new marketing initiatives.

For lead generation marketing, there are a number of market test measurements that are particularly worthwhile to address your more critical marketing decisions.

1. Test a marketing tactic or integrated set of tactics to determine the incremental lift on leads generated.
For direct marketing, your approach is to withhold specific direct mail or e-mail communications from a random sample control group to determine the incremental lift in generating leads. If the control group nets the same proportion of qualified leads as the test group, it is likely that your other lead generation activities are capturing the opportunities out there. Any lift in the test group over the control group is attributed to your marketing.

Mass marketing tests require a geographic split of comparable markets or regions, matched through careful sales trend analysis. The test markets receive the incremental marketing to determine the incremental lift in quality leads.

2. Test the incremental value of lead generation marketing to the sales organization in terms of incremental sales conversions and average customer value.
The same testing approach outlined above can be used to assess the impact on closed sales rates or average customer value (in addition to lift in leads). This comparison is very appropriate when the sales organization is trying to make the case that marketing is not adding value to the sales process or that the leads generated would have been identified through the sales organization anyway. The analysis should determine if the test group receiving marketing contacts experiences more leads, a higher net close rate, and/or higher average customer value per sale than those receiving no or less marketing contacts. This may require withholding marketing for the select accounts for a long period of time and it is justified when there is an established belief that less marketing is needed. If you set up your tracking to monitor performance changes during the test, you may be able to detect a decline in performance early, at which time marketing can be resumed instead of allowing the control group to hurt sales results.

Keep in mind that measurement success is dependent on having statistically significant sample sizes to minimize the normal variance that might occur if you created the two groups and treated both the same. There are analytic processes that can help set up the experimental design. Also be sure to eliminate possible biases – for example you are better off comparing a portion of each sales rep’s accounts than splitting the sample by account rep when the rep performance may vary.

3. Test and assess new marketing initiatives.
The addition of new marketing initiatives can easily fit into a market test structure. If the marketing initiative is planned to launch nationally and there is the flexibility to do so, a measure of the initial impact can be obtained through a phased-in launch that occurs regionally. Control groups are set up within the regions launching last. The primary objective of the measurement should be on improving the new marketing initiatives (as opposed to continuing vs. canceling). So the analysis should look deeper than bottom line results for insights such as identifying that the marketing is working with specific target segments or where in the customer funnel the performance is stronger or weaker.

4. Test extending lead generation programs beyond just lead volume to determine the potential for nurturing programs or sales support marketing.
As we addressed in the first two articles of this series, there are often opportunities to improve lead generation effectiveness not by increasing lead quantities, but by either increasing the conversion rates within the sales pipeline or by nurturing leads that were generated but not yet qualified. The ROI analysis can be used to show the profit potential of these initiatives. Market testing is used to develop effective programs on a small scale with minimal budget and then build the case for additional funding.

How do we measure leads passed to external channel partners and resellers? (collaborative measures)

When marketing organizations are passing leads to external channel partners, there is often a huge gap in tracking that ultimately leads to the challenge identified in our first question above on accurately matching contacts to buyers. There are several measurement approaches specifically for third party relationships which are worth consideration.

1. Set requirements for channel partners to report lead outcomes on a regular basis. Some companies are very successful with this approach, typically because they have good quality leads that the channel partner is willing to work for. In other cases, the channel partner views the customer relationship as their own and will not such disclose details. The goal is to find the win-win that improves marketing effectiveness which is beneficial to both parties.

2. Set up a joint market test. This works well when testing new initiatives. If the channel partner understands that your company needs to demonstrate the value of the specific lead generation investment to benefit both organizations, they may provide enough quality feedback for an assessment (maybe excluding customer details).

3. Use survey research. Survey your leads periodically to measure their final purchase decision. Surveys are also a good opportunity to get detailed information on their funnel progression, leakage reasons, and insight into competitive considerations.

Here is a brief re-cap of how different methodologies can be applied to assess lead generation marketing effectiveness:

  • Pre-post tracking is an easy, low-cost measurement that provides insight into relative effectiveness based on crediting just the final lead source. It is not entirely reliable but offers directional information that can improve performance.
  • Surveys can help close data and tracking gaps. This is also a good methodology when assessing marketing programs where sales are closed through channel partners or resellers that do not report sell-through data back to your company.
  • Market testing is very effective for isolating the impact of a specific set of tactics or the introduction of new campaigns. This also works well to identify the incremental lift of brand marketing on lead generation effectiveness.
  • Modeling is the best solution to assess multiple marketing channels. More advanced modeling techniques can be used to assess the impact of non-marketing factors on your marketing effectiveness such as sales coverage, competitive activity, or market conditions.

 

In the next and final article of this series on lead generation ROI, we’ll cover lead generation metrics and how these are used to manage your overall performance.

 

Jim Lenskold is President of Lenskold Group and author of Marketing ROI, The Path to Campaign, Customer and Corporate Profitability (McGraw Hill, 2003). Founded in 1997, the Lenskold Group (www.lenskold.com) provides consulting services to deliver a comprehensive approach to marketing ROI management, marketing measurement and analytics, and profitability planning tools. Jim’s career began in the mid-1980’s at AT&T where he managed a $20 million marketing budget for retention marketing and new strategy development. He also successfully launched and grew a technology firm before starting the Lenskold Group. The Lenskold Group serves Fortune 1000 and emerging companies in the US, Canada and Europe. Jim can be reached at jlenskold@lenskold.com

ADVERTISEMENT
ADVERTISEMENT
B2B Marketing Exchange
B2B Marketing Exchange East
Campaign Optimization Series
Buyer Insights & Intelligence Series
Strategy & Planning Series